AMI UEHPL205-16MZ20CB Hanger Unit Bearings

Seals:DD (Contact Rubber S; Type:Bearings with Housin; Number of Bearings:Double; Holder Surface Treatment:Black Oxide Coating; Number of Bearings:Double; Shape:T-Shaped; Bearing Used:Deep Groove Ball Bea; Bearing Retained:No; Bearing Used:Deep Groove Ball Bea; Bearing Part Number:6902;

Case hardening (outer ring only):No; Format symbol:HMK; d:25; Revolution Frequency(rpm):6500; Days to Ship:6 Days; Outer Ring:With Outer Ring; Rolling Element Material:Steel; Lubricant:Presence; Outer Ring Type:Flat; Rolling Element Material:Steel;

Basic Load Rating, Dynamic Rating(N):152000; Large-capacity type:Standard; Specifications:Standard; Raceway Ring Shape:Cylindrical Roller; Shaft Bore Config.:Cylindrical Bore; Outer ring oil hole:Standard; d:90; D:160; Load Direction:Radial; Inner/Outer Ring Material:Steel;

A4:28.5 mm; T min.:-40 °C; J:90 mm; e:19 mm; B:34 mm; Weight:0.59 kg; S:17 mm; Designation of bearing:EX201-08G2T04; Recommended tightening torque for set screw:3.7 Nm; s1:30.5 mm;

Days to Ship:7 Days; Flange Shape:Compact Type; Shape:Flanged Pilot Type; RoHS:6; Housing Material:1045 Carbon Steel; Bearing Retained:Yes (with retaining; Type:Bearings with Housin; Number of Bearings:Double; Bearing Material:[Steel] Steel; Width T(mm):30 ～ 70;

Flange O.D. H(φ):126; Bearing I.D. d(mm):35; Volume Discount:Available; Housing Material:1045 Carbon Steel; Volume Discount:Available; Seals:DD (Contact Rubber S; Bearing Used:Deep Groove Ball Bea; Holder Surface Treatment:Black Oxide Coating; Number of Bearings:Double; Type:Bearings with Housin;

B1:109.5 mm; Weight:12.78 kg; A:64 mm; SW:7.94 mm; B:84.1 mm; S:42 mm; T min.:-20 °C; d:82.55 mm; d1:127 mm; C:132.6 kN;

Designation of bearing:UC206-20G2L3; C0:11.2 kN; L1:25 mm; N:M10; L:85 mm; E:18 mm; C:19.5 kN; T min.:-20 °C; Designation of housing:PG206-; G:M6x1;

Type:Bearings with Housin; Holder Surface Treatment:Electroless Nickel P; Bearing Retained:Yes (with retaining; Number of Bearings:Double; RoHS:6; Bearing Part Number:6003; Flange O.D. H(φ):66; Bearing Used:Deep Groove Ball Bea; Bearing Material:[Steel] Steel; Days to Ship:7 Days;

Rolling Element Material:Bearing Steel; Fit:J7; Unit Body Material:Cast Iron; Unit, Type:Insert Bearing Unit; Surface Treatment:No; Rolling Element Material:Bearing Steel; Stroke:No; Days to Ship:Quote; Unit Body Material:Cast Iron; Diameter series symbol:Used for Light load;

A1:13 mm; J:111 mm; Recommended tightening torque for set screw:22 Nm; d:50 mm; B:51.6 mm; N:18mm; Z:37.5 mm; A:44 mm; C:35.1 kN; L:143 mm;

Raceway Ring Shape:Needle Roller; Specifications/Environment:Standard; Number of Raceway Ring Rows:Single Row; d:24; Specifications/Environment:Standard; Rolling Element Material:Steel; RoHS:6; Size Standards:Metric System; Precision (JIS):Grade 0; Raceway Ring Shape:Needle Roller;

Seal:Triple seals; Bearing Inner Dia. Shape:Tapered hole adapter; Unit, Type:Insert Bearing Unit; Bearing Unit, Type:Others; Bearing Unit, Type:Others; Surface Treatment:No; Diameter series symbol:Medium Load; Stroke:No; Rolling Element Material:Bearing Steel; Unit, Type:Insert Bearing Unit;

Characteristic inner ring frequency, BPFI:7.45 Hz; Dynamic load, C:21 kN; Nlim (grease):9,200 rpm; Characteristic cage frequency, FTF:0.43 Hz; f0:15.3; Radial clearance class:C3; ra max:1 mm; da min:50 mm; Fatigue limit load, Cu:0.69 kN; Characteristic rolling element frequency, BSF:6.73 Hz;

T max.:100 °C; N:25mm; C:113.36 kN; e:21 mm; T min.:-40 °C; H3:200; A1:25 mm; B:82 mm; Designation of housing:FS315-; G:M10x1;